Leakage is one of the problems that is often encountered in PVC pipes. The causes can be various things, for example, the connection is not correct or the pipe is hollow because it has a low quality. This can actually be avoided as long as we know how to prevent PVC pipe leakage and practice it properly. Apart from that, check out the best plumbers San Diego if you need a reliable plumbing company near your neighborhood.
However, if a leak has already occurred, don’t panic first. Here are some ways you can do to deal with PVC pipes that leak at home:
Find out where the leak is
One sign of leaking PVC pipes is droplets or seepage along pipes or on walls and floors when pipes are planted inside. However, that does not mean that the point is the source of leakage because water can flow first along the pipe before dripping or stagnating and seeping. Well, to know clearly the source or point of leakage, the step that must be done is to clean the suspected pipe as a source of leakage with a dry cloth, then pay close attention to ascertain the source of the leak.
Pipe or connection replacement?
Before replacing a damaged pipe, make sure first whether the leak occurs in the pipe or the connection. This is because different parts that leak is different ways to overcome them.
Overcoming leaks in pipe connections
If a leak occurs at the pipe connection, then what must be done is to replace the damaged pipe connection with a new connection. At the time of replacing the connection, layer the connection with the sealtape so that the connection is more tight while avoiding pipe leakage in the future.
Overcoming leaks in the pipe body
There are two ways that can be done to overcome leaks that occur in the pipe body, namely by patching or replacing the pipe as a whole. Patching is done if the damage is still on a small scale such as a hole or small crack. The trick is to cut the pipe used to patch the letter U, making sure the size is larger so that it can cover the leaked area. Apply a special glue to the PVC pipe on both pipes, then paste and hold it until the pipe is completely dry.
While the pipe replacement is done when the leaked part turns out to be quite large and can no longer be patched. The trick is to cut the area of the leaked pipe, preferably increase the cutting area by about 1 to 2 inches to avoid any small leakage around the leaky source. Make sure the pipe is completely dry from the rest of the water. Then connect with a new pipe of the same size using PVC or drat glue.